Optional Installation - Corsair HD120 RGB Guide D'installation

HD120 RGB FAN
Installation Continued
> Find a location for the RGB LED controller that allows the cable to reach
the fan hub and gives you easy access to the buttons.
> Mount the RGB LED controller with the provided mounting strip.
> Plug in the 3 pin cable from the fan controller into the fan hub.
> Plug in the SATA power cable from the fan hub into an unused
SATA power connector from the system PSU.
> Plug the fan power cable into an unused fan port on your MB or fan controller.
• The fan power cable provides power and PWM control for the fan.
• The RGB LED cable provides power and control for the RGB LED's.
> Both cables are required to be plugged into their
respective ports in order for proper operation of the fan.
5
HD120 RGB FAN

Optional Installation

> An optional cable is supplied that allows connection to a pushbutton
to operate the mode, color, and speed options from an external source.
> Chassis buttons such as reset pushbutton or power pushbutton
are examples of pushbutton that would work with the optional cable.
> Connect the optional cable to the port on the top of the controller
(the connector next to the "HD RGB Controller" on the fan controller.)
6