Cleaning, Care & Maintenance; Technical Specifications - Buffalo CE208 Mode D'emploi

UK
Cleaning, Care & Maintenance
• Disconnect from the power supply and allow the appliance to cool before cleaning.
• Use warm, soapy water and a damp cloth to clean the appliance.
• DO NOT use abrasive cleaners or pads.
• Dry thoroughly after cleaning.
• A BUFFALO dealer or qualified technician should carry out repairs if required.
• There is a removable air filter on the bottom of the appliance. Pull it out of its slot and clean with a
vacuum cleaner.
Troubleshooting
If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Error Message
Unit Beeps
E01
E02
E03

Technical Specifications

Model Voltage
CE208 220-240V
50/60Hz
3
Cause
No pan or pan not suitable
for induction cooking
Unit has over heated
Pan being heated is empty,
temperature of pan is too
high
Power input has risen/fallen
below units operating limits.
Power
Current
(max.)
3000W 13A
Solution
Use pan suitable for induction cooking such as
Vogue Stainless Steel Range
Ensure ventilation filter (located underneath
unit) is clean and unblocked. Allow unit to
cool. If error code still appears after unit has
cooled contact a Buffalo agent or qualified
engineer.
Remove pan from unit. Allow unit to cool.
Ensure pan contains product to be heated. If
error code still appears after unit has cooled
contact a Buffalo agent or qualified engineer.
Switch off unit. Allow unit to cool. If error code
still appears after unit has cooled contact a
Buffalo agent or qualified engineer.
Dimensions
Power range
(h x w x d) mm
105 x 430 x 328
500 - 3000W
Weight
(kg)
5.6