FIRST AUSTRIA FA-5170 Mode D'emploi page 2

MINI THERMOELECTRIC COOLER
AND WARMER
INSTRUCTION MANUAL
CHARACTERISTICS OF OUR PRODUCTS:
Mini Thermoelectric Cooler and Warmer is
popular with drivers and field operators in
some developed countries in Europe, America
and so on. It can bring you cool drinks in hot
summer and warm food in winters with cold
wind blowing. No matter in outdoor hiking
traveling by car or in traffic jam, you can
enjoy plenty of drinks and foods at a proper
temperature.
This cooler and warmer may be carried
on your back or in hand for its lightweight.
Matching with AC or DC transformer attached,
it can be used indoors, especially for students
to store cool and hot drinks and foods in
their own room. If it is placed in hotel, office
or sitting room, its graceful design, beautiful
appearance, luxury style and extraordinary
applicable function, will bring you a sense of
ease and comfort when you are holding a cup
of cold drink in your hand after work.
It integrates dual functions of cooling and
heating by employing semiconductor, without
compressor or cryogen. It has advantages
of being free from pollution, small volume,
lightweight, portability, long service life and
lowest power consumption.
APPLICATION.:
• for holding banquet beside the lake
• for picnics and on camping trips
• for taxi drivers
• In students' dormitory or dinning hall
• in playground
• in the office or construction site
• for traveling by cars
• on yacht outing or go fishing
• in wagon, truck or traveling bus
• for storage of medicine at a low
temperature
• for preservation of fresh milk and warm
food
• for home bar
WORK PERFORMANCE:
To obtain optimized cooling effect, we suggest
putting in pr -chilled foods and drinks. It will
take 2 or 3 hours for cooling the unfrozen
foods or drinks.
The cooler and warmer is not designed to heat
cold food but to preserve hot foods at a warm
temperature. If necessary, it can heat the foods
with more than 2 hours.
If it's applied properly following the direction,
the temperature of foods can be kept for hours.
OPERATION GUIDE:
1. First make sure the switch at the side of
the cooler and warmer is in OFF state, and
then insert the plug of the power cord into
the socket of the unit.
2. Insert the plug of the cigarette lighter into
the cigarette lighter in the car.
3. Cooling: set the power switch at the
position of COLD. The green indicator will
be on indicating the unit is in cooling mode.
4. Heating: set the switch at the position of
HOT. The red indicator will be on indicating
the unit is in heating mode.
ATTACHMENT: THE DIFFERENT USE
BETWEEN OUTDOOR AND INDOOR:
Attachments
If you want to set an
increased energy efficiency
and a limited cooling
capacity for the cooler
unit,use the cooler's ECO
mode.
1. Cold Hot Switch
2. Energy efficiency
When car power is used (DC 12V, the
appliance of products is subject to the
types of cars)
1. The car engine is required.
2. The plug of DC power cord is the cord into
the socket of the lighter in the car.
3. Insert the plug of DC power cord into the
socket of the lighter in the car.
4. Adjust the control switch to choose cold or
hot mode. But ECO and MAX patten are
useless.
2
When the household power is used (AC
220-240V)
1. Connect the connect of AC power
cord (household power cord ) with the
household socket of the product.
2. Insert the power socket into the concentric
plug.
3. Adjust the control switch to choose cold
or hot mode. When turning cold, ECO is
power saving mode, MAX means maximum
refrigeration, off means turn off.
WARNING AND NOTICE
FOR THE PROPER OPERATION, PLEASE
READ THE BELOW-STATED CAREFULLY
BEFORE USING THE APPLIANCE. MISUSE
OF THE APPLIANCE WILL CAUSE THE
DEATHES AND INJURIES OF PERSON AND
THE APPLIANCE DAMAGE.
1. Prevent the fans from being stuck. The fans
being stuck will heat the engine and cause
fire. The towel, cloths and the like shall not
be put on it.
2. Please confirm the sockets of the cords to
be tight. The loose socket will result in the
cords and sockets heating and broken,
even fire.
3. Keep the appliance away from the
flammable items and dampness to prevent
the explosive and fire.
4. Don't break up or refit the appliance.
5. Don't switch the function of cool/warm
abruptly. Switch the function after 30
minutes of being on OFF.
6. Don't rinse it with water.
7. Prevent the appliance from being upside
down.
8. Please don't drop or shock it.
9. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
10. For appliances with type X attachment
having a specially prepared cord, the
instructions shall contain the substance of
the following.If the supply cord is damaged,
it must be replaced by a special cord or
assembly available from the manufacturer
or its service agent.
TECHNICAL DATA:
AC 220-240V ~ 50/60Hz • 58W • DC 12V
Environment friendly disposal
You can help protect the environment! Please
remember to respect the local regulations:
hand in the non-working electrical equipments
to an appropriate waste disposal center.
3