Scope Of Delivery; Dimensions; Installation Example; Assembly - Franke F3SM2004 Notice De Montage Et De Mise En Service

7.

Scope of delivery

Quantity
1
1
1
1
1
2
1
8.

Dimensions

9.

Installation Example

10. Assembly

Warning!
Only operate the tap with non-return valves and the specified filters.
Failure to observe this instruction can result in an increased germ load in the
drinking water and thus pose a health or mortality risk.
☞
Important!
Prior to the assembly process, flush the pipework in accordance with DIN 1988.
10.1 Remove the wall protection.
☞
Ensure a clean cut.
10.2 Cut off any protruding parts of the wall mounting box.
10.3 Shut off the water supply.
10.4 Remove the T-type flush connector (a) and any seals that are present.
☞
Important!
Note the installation position of the filter seals.
10.5 Mount the tap (c) with the spout and filter seals (b).
10.6 Install the frame (d) in a horizontal position.
10.7 If necessary, shorten the spacer sleeves (e) to fit the distance from the front edge of
the wall mounting box to the front edge of the tiles.
Simplified drawing without tap.
10.8 Open the water supply.
Name
F3S self-closing single mixer tap with
non-return valves
Frame with profile seal
Cover plate
Push-on rosette
Plastic bag of filter seals
Plastic bag of attachment materials
Installation and operating instructions
- 5 -