Initial Parameter Set Up (Users Set Up) - Konect PRODUO 80 Manuel D'utilisation

INITIAL PARAMETER SET UP (USERS SET UP)

Test LiXX Inter-
nal Resistance
24
Lilo/LiP0/LiFe
CHK Time
Measuring IR 1: --- --- --- mΩ
4: --- --- --- mΩ
As default this charger will be set to
typical user settings when it is connected
to a 12V battery for the first time.The
screen displays the following information
in sequence and the user can change the
parameter on each screen.
If you need to alter the parameter value in
the program,press"Start/Enter"key to make
it blink then change the value with"INC"or
"DEC"key. The value will be stored by
pressing"Start/Enter" key once.
Battery Pack IR
0mΩ