Save Data Program - Venom Group International Medion Dual 10 amp Manuel D'utilisation

PROGRAM SELECT

SAVE DATA PROGRAM

The data storage feature allows the user to store and load battery profiles for
frequently used batteries instead of always reprogramming the charger. This
feature will store up to 5 different battery profiles. To set up the parameter
value in the program, press Start/Enter button to make it blink, then change the
value with the INC or DEC button.
0668
The profile value set in the profile screen does not
affect the charge or discharge process. They only
represent the specifications of the battery. The
following screens will automatically be displayed
exactly matched to the battery type you set up.
The example shows a NiMH battery, 12 cells and
3000mAh capacity.
Set up the charge current for manual charge
mode, or current limit for automatic charge mode.
Each mode can be switched by pressing the INC
and DEC button simultaneously when the current
field is flashing.
Set up discharge current and final voltage.
Setting the cycle type and the number of cycles.
Press the Start/Enter button for more than 3
seconds to save the profile. The above process is
similar for LiPO and Pb Batteries.
[ 19 ]