Disabling/Enabling Bluetooth ® Wireless Technology - Dyson lightcycle CF04 Manuel D'utilisation

Disabling/Enabling
Bluetooth wireless
®
technology
The light has Bluetooth wireless technology
®
enabled by default.
Press and hold the middle button until
the LED lights on the three buttons blink.
The main light source will turn off and
then on again to show that Bluetooth has
been disabled.
To re-enable Bluetooth, repeat the
instructions above. The main light will blink
twice to show that Bluetooth has been
re-enabled.
22
18.10.2018 11:43 - C94648_CF04_OPMAN_EU_X552-LI