Getting Started; To Charge The Device; Turning On; Turning Off - freeVoice Space Manuel D'utilisation

E

Getting Started:

Piease fully charge headset after removing it from the package before
beginning the pairing process.

To charge the device:

1 Insert the USB charging cable into an active USB port.
2 Insert the micro USB into the socket on the charging station
or directly into your heasdset.

Turning on:

Slide the ON/OFF switch to the middle position.

Turning Off:

Slide the ON/OFF switch to the OFF position.

Pairing the Headset:

«Pairing» is the connection of your headset with Bluetooth technology
with a Bluetooth-enabled device. This process must be executed only
once for each new device become.
Slide the ON / OFF switch to the «pairing position» (Bluetooth symbol)
and hold it for 2 seconds until the LED light starts to flash blue. Open
the menu Bluetooth on your mobile phone and select «Space» to
connect. After successful pairing, the blue LED light goes out and
flashes then blue at intervals of 8 seconds.

Pairing a second device:

This headset includes a multipoint function for simultaneous
connection of two devices.
Repeat the same procedure as when pairing the first device.
If the second device is connected, you must re-activate the space in
the Bluetooth menu of the first device.
Connection to a PC or laptop:
Extend the features of your headset with the UC Manager
Plug the USB dongle (optional) into an active USB port.
Install the UC Manager (download at: www.freevoice.biz).
Make all settings directly via software «UC-Manager».
14