Marmitek iParty Nano Mode D'emploi page 5

8
9
Technical specifications
Power:
Batteries:
Dimensions receiver:
Dimensions transmitter: 112x44x14,5 mm
iParty
tm
6. Set the Channel Switch to match the setting on
6 8 7
7. Connect the included plug-in power supply to
8. Attach the Wireless Receiver to your stereo's
9. Extend the antenna and point it in the general
10. When the battery in your iParty Sender goes
10
230 V AC/50 Hz, 12 V/100 mA adapter
NiMH 4/5AAA 1.2V, 400 mAh
95x85x24 mm
your Marmitek iParty Wireless Sender.
the Wireless Receiver and plug the power supply
into an AC outlet near your stereo.
Audio or AUX input using the supplied RCA
audio cable.
direction that you intend to listen to your music
from.
flat, you can charge it by inserting it into the
compartment in the Receiver. Keep a spare
battery charging in the Receiver so you can
swap the batteries when the one in your iParty
Sender needs to be charged.
5