Safety Instructions - IN HOUSE LED Dali Push SIKD002 Manuel D'utilisation

As DALI and push dimming is always active , If use the DALI dimming and push dimming first , users
have to short 1-10V interface and power on driver 5 seconds at least to make
1-10V active before using 1-10V dimming.
3- Synchronization of driver
Ø Press and hold the button for at least 15 sec.
Ø The driver starts the light at 50% light level, the system is now synchronized.

4. SAFETY INSTRUCTIONS

Please do not install this controller in lightning fields, intense magnetic fields and high voltage.
1. Reduce the risk of component damage and fire due to a short circuit, make sure the connection is
correct.
2. Always be sure to mount this unit in an area with adequate ventilation to ensure proper mounting
temperature.
3. Check if the voltage and power adapter are suitable for the controller.
(please select a DC12-24V constant voltage power supply)
4. Do not connect live cables; make sure that the connection is correct and that no short circuit has
been verified with the instrument before switching on.
5. Please do not open the controller cover and operate it if there is a problem.
The manual is only suitable for this model; any update is subject to change without notice.
Distribué par / Distribuito da / Distributed by NETELEC SRL FR - rue Philemon Laugier - 83400 Hyeres les Palmiers