Front Electronics QWERTY ICON Guide D'utilisation page 13

1. Turn on the PS®3 console;
2. Plug the receiver dongle into an available USB port on the PS®3 console then press the FC
(Force Connect) button on the receiver dongle. The synchronization LED will flash quickly;
3. Press the "HOME" button on the controller to synchronize the controller with the PS®3 console.
Press the "HOME" button again to active the wireless connection. (If the connection is successful,
the current channel LED and synchronization LED will glow solid. If the connection is
unsuccessful, the four channel LEDs and synchronization LED will continue to flash);
An automatic connection will now be established between the controller and the receiver when the
PS®3 console is powered on. Simply press the "HOME" button to active the connection.
WARNING
Read, understand and follow all instructions, cautions and warnings listed in this manual and in
the PlayStation Operations Manual. Failure to follow instructions could result in personal injury or
damage to the console.
The controller must be used with care to avoid injury. The manufacturer will not be liable for
injuries resulting from improper use of the controller.
If you have any physical conditions, consult with a physician before using the controller.
Stop using this product and consult a doctor if you or your child have any of the following
symptoms: Convulsions, Loss of Awareness, Involuntary movements, Eye or Muscle Twitching,
Altered Vision and/or Disorientation.
Stop using this product immediately if you begin to feel tired or if you experience discomfort or
pain in your hands and/or arms while operating the product. If the condition persists, consult a
doctor.
The vibration function of this product (if available) can aggravate injuries. Switch off or do not
use the vibration function of the product if you have any ailment of the bones or joints of your
hands or arms.
Avoid prolonged use of this product. Take breaks every 30 minutes.
Route all cords so that they are not likely to be walked on or tripped over. Make sure that cords are
not placed in positions or areas where they may become pinched or damaged. Do not wrap the
cord around any part of anyone's body.
Do not allow children to play with cords.