Disposal Of Device; Protection Of The Environment; Warranty Conditions - REBER 9718 N V-Home Manuel D'utilisation

EN
H. DISPOSAL OF DEVICE

PROTECTION OF THE ENVIRONMENT

The crossed-out wheeled bin symbol placed on the product and on
the accompanying documentation indicates that the product itself
is subject to Directive 2012/19/EU which regulates the collection,
the management, he processing and the disposal of electrical and
electronic equipment waste (WEEE).
When the product reaches the end of its lifetime must therefore not be
disposed of as a common mixed urban waste but it must be subject to
sorted collection at authorized collection centers.
Responsible disposal of electrical and electronic equipment waste
helps to ease the material resources sustainable recycling and reuse,
as well as to avoid possible damages to the environment and to hu-
man health caused by uncontrolled waste disposal.
The municipalities organize sorted collection centers specialized for
WEEE. For more detailed information regarding the WEEE collection
and pick-up systems, it is possible to refer to your own municipality or
to the local household waste disposal service.
Moreover, at the time of purchase of a new equivalent equipment in-
tended to be used in a household environment, the customer has the
right to freely lend, at the rate of one on one, the used equipment to
the distributor which will provide for its disposal as required by law.
Professional purchasers are exhorted to contact their own supplier to
check the terms and conditions of the purchase contract.
I. WARRANTY CONDITIONS
The appliance is prepared for use Reber embossed bags of the same
type as furnished with the machine, if used with different or other label
bags the machine could not have same performances.
This appliance is not intended for use with high grade humidity food;
liquids suction may damage the appliance (Pump, El. Card and va-
cuum chamber Gasket) and this is considered inappropriate use and
out of warranty cover.
Domestic use: European warranty cover the machine for 24 months
form the purchasing date.
Professional use: The supplier restricts himself to repair or replace all
components should have constructions faults in the first 12 months
from the date of installation and however not later than 18 months
22