Volume Adjustment - Facom BSYS.BPMUSIC Notice Originale

EN
Powering ON and OFF
Press the POWER button (
The appliance turns on to the last selected
audio source .
Press the POWER button (
The appliance turns off .

Volume Adjustment

WARNING: Excessive sound level can
cause hearing loss .
NOTE: The volume is set and saved
separately for each of the audio source types .
Turn the dial (
the volume . To decrease the volume, turn
counterclockwise .
Back Button (
After entering any one of the screens, press
the Back button (
previous screen .
Audio Source Select (
To choose one of the audio sources (DAB+,
FM, AUX or Bluetooth) push the source
selection button (
is found . For example, if the radio is on FM,
seen in upper left portion of LCD display,
push the source button to change to AUX .
MAIN MENU (General Setup)
General Setup can be accessed from each of
the selected audio sources by:
1 . Pressing the selection dial (
Rotating the selection dial clockwise
2 .
until Main Menu is reached
3 . Pressing the selection dial to access
the Main Menu.
From the main menu the following actions can
be performed:
• Sound: tone adjust: Bass, Treble and Mid
• Language: select the interface Language
Brightness: adjust the screen Brightness
•
Restore to default
•
FM TUNER SETUP
The BSYS .BPMUSIC can be tuned to DAB+ /
FM radio frequencies with the option of saving
up to (6) DAB+ and (6) FM preset stations .
34
NU-BSYS.BPMUSIC_0617.indd 34
) for 1 second .
) for 3 seconds .
) clockwise to increase
)
) to return to the
)
) until the desired source
) .
After setting and saving the preset stations,
pressing a preset button (
changes the frequency to the desired station .
Finding a desired frequency can be performed in
one of two methods: Auto Scan or Manual Tune .
Auto Scan
4 . Press the audio source button (
until the required source is reached .
5 . Press the selection dial (
the Main Menu (see General Setup) .
6 . Rotate the selection dial clockwise until
Auto Scan is reached and press to
select .
The Auto Scan begins searching for the
closest strong, clear signal .
• Rotate the dial clockwise to scan up
the frequencies .
• Rotate the dial counterclockwise to
scan down the frequencies .
7 . Once a desired frequency is found, save
it to one of the channel preset buttons
(see Setting the Preset Buttons) .
Manual Tune
8 . Select the required audio source and
enter the Main Menu (see General
Setup) .
9 . Rotate the selection dial clockwise and
press it to select Manual Tune .
10 . Rotate the selection dial clockwise
to go up the frequencies or
counterclockwise to go down the
frequencies, until the desired frequency
is reached .
11 . Once a desired frequency is found, save
it to one of the channel preset buttons
(see Setting the Preset Buttons) .
SETTING FM PRESETS
12 . Set the radio to the desired station/
frequency (see Auto Scan or Manual
Tune) .
13 . Press and hold the desired preset button
) until a message >> P# is
(
displayed . The station is saved to the
displayed preset button number (#) .
) instantly
)
) to enter
30/06/2017 08:04:03