Using The Salmiéri Drm-Kd (Alone); Technical Specifications - Prodipe DR8 Salmiéri Manuel Utilisateur

Using the Salmiéri DRM-KD (alone)
The microphone DRM-KD Salmiéri is used on the kick drum of the kit DR8 Salmiéri. This microphone is also
sold only, for use in guitar amp or bass amp. It has a very wide bass register, and it is able to collect
significant levels of acoustic pressure. Ideal for the sound of percussion, kick drum, but also bass, big brass
(trombones, tubas ...) and all the instruments at very high volume.

Technical Specifications

DRM-C (snare drum and toms)
•
Type: Dynamic
•
Frequency response: 50Hz to 15KHz
• Directivity: Cardioid
•
Sensitivity: -49dB ±3dB (0dB=1V/Pa to 1KHz)
•
Impedance: 600Ω ±30% (to 1KHz)
• Connection: XLR balanced male
DRM-KD (bass drum, amp recording...)
•
Type: Dynamic
•
Frequency response: 30Hz to 15KHz
•
Directivity: Super cardioid
•
Sensitivity: -50dB ±3dB (0dB=1V/Pa to 1KHz)
•
Impedance: 300Ω ±30% (to 1KHz)
• Connection: XLR balanced male
DRM-OV (overhead and charley)
•
Type: back-electret 16mm
• Frequency response: 30Hz to 18KHz
•
Directivity: Cardioid
•
Sensitivity: -38dB ±3dB (0dB=1V/Pa to 1KHz)
•
Impedance: 100Ω ±30% (à 1KHz)
•
Noise: 20dB A
•
Pression max SPL: 135dB (à 1KHz≤1% T.H.D.)
•
S/N Ratio: 74dB
• Phantom power: 9V-52V
•
Connection: XLR balanced male
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2016 IPE Music/Prodipe
Page 13