Hema 80.06.0013 Mode D'emploi page 15

PARTS DESCRIPTION
The device consists of the following main components:
1. Main body (Fan guard + Fan blade)
2. Indicator light
3. On/off/ speed switch
4. USB charge jack
5. handle
6. Base
7. USB cable
HOW TO CHARGE
1. Connect one end of the USB cable to the charge jack of the appliance, and another end to the USB port of
the computer or other DC5V USB adaptor port. Be sure it fits tightly.
2. The appliance begins to charge, the indicator light will flash red. When the battery is full, the indicator light
will be still in red.
FIRST USE / OPERATION
1. Press the on/off/speed switch once, the appliance will work on low speed; press twice, the appliance will
work on middle speed; press three times, the appliance will work on high speed; press four times, the
appliance will be off. When the appliance is working, the indicator light is still in blue.
2. You can use the appliance in three ways:
1) Hold the fan in hand.
2) Stand the fan in its base.
3) Make the fan lie on its left side as below picture shows.
Note:

To prevent overloading a USB-computer port, do not plug the fan into a USB port that is servicing other
electrical needs.

The fan will be fully charged in 4.5 hours approximately. Do not exceed this length of time for charging as
you may damage the battery and shorten the lifespan of the fan.
CLEANING AND MAINTENANCE
1. Before servicing the fan and after each occasion of use, switch off the appliance and unplug the appliance.
2. Never immerse the appliance in water (danger of short-circuit). To clean the appliance, only wipe the fan
down with a damp cloth and then dry it carefully.
3. Take care that excessive dust does not build up in the air-intake and air-outlet grille, and clean it occasionally
using a dry brush or vacuum cleaner.
4. Pack the appliance in its original box and place it in a dry, well-ventilated place when it is not to be used for
a long period of time.
- 14 -