Kenwood Nexedge KTI-4 Mode D'emploi page 5

oRIEnTaTIon
Rear Panel
q
q DC Power supply connector
Connect to Repeater or external power supply.
w N SYNC jack
This jack is currently not used.
e LAN jack
Connect to Ethernet. Use a shielded, Category 5e or higher standard
LAN cable shorter than 3 meters.
r AUX jack
Connect to Telephone Patch via the supplied Telephone Patch Cable.
Indicators
Indicator
PWR
STATUS
LAN : Right
(Full Duplex)
LAN : Left
(00Mbps)
Indicators
DC IN
PWR STATUS
13.6V
Color
Green Lights while the power is ON.
Green Lights during communications.
Lights when in Full Duplex mode. Blinks when a
Green
collision status is detected in half Duplex mode.
Green Lights when in 00Base-TX mode.
Indicators (LAN)
N SYNC LAN
e
w
Meaning
AUX
r
3