Adjustments And Operation; Unfolding And Folding - MOLINO ELECTRIC STEP Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
CAUTION!
It is always recommended to start the Electric Scooter by pushing, thus to
reduce the start load on the motor. Your scooter would have a much longer
lifetime with push assistance.
It is an electrically operated toy! Recommended transformer must be used.
The transformer is not a toy! It involves a risk of electric shock!
Charger is meant for dry locations, and indoor use only.

Adjustments and Operation

UNFOLDING AND FOLDING

Your scooter is shipped in the folded and locked position. To unfold, lift the quick
release handle on the opposite side. This is an adjustable spring-loaded handle
(fi g. 2). Turn the spring loaded handle. This will allow you to lift the handlebars
to the upright position. Lock the spring-loaded handle into the small round guide
hole. Clamp down the quick release handle. Check for a secure lick. Reverse this
procedure to fold. There is a tightness control adjustment nut on the spring-loa-
ded handle.
2020-08-13 OCG Molino E-step ManualV01.indd 5
2020-08-13 OCG Molino E-step ManualV01.indd 5
Fig. 2
ADJUSTMENT
LIFT QUICK RELEASE
HANDLE
Fig. 3
EN
5
28-08-20 16:24
28-08-20 16:24

Publicité

Table des Matières
loading

Table des Matières