Installation; Built-In - ETNA WL915 Mode D'emploi

INSTALLATION

Built-in

EN 6
Prior to connecting the drawer, ensure that all cables in your
home's electrical system are of sufficient diameter to supply the
appliance properly. Your system should be protected by a 10-amp
fuse.
Slide the appliance in the kitchen cupboard aperture. Check whether
the casing fits correctly.
Open the drawer and secure the appliance to the cupboard using the
2 screws supplied.
560-568
595
After installation, place the decorative strips on the ends of the front
panel. Remove the foil and stick the strips on the ends of the front
panel.
min. 550
450
500
540
139
460
134
595