Customer Satisfaction - Homak GARAGE Série Manuel Du Propriétaire Et Mode D'emploi

WORKBENCH ASSEMBLY:
1) Bolt bottom back cross piece (Part I) and bottom side cross pieces
(Part J) to legs (Part K & L) using a total of 12 bolts (Part T).
2) Bolt 2 large triangles (Part M) to (Part I) and (Part J) using a total of
8 bolts (PartT).
3) Bolt 2 small triangles (Part N) to bottom back cross piece (Part I) and
back legs (part L) using a total of 4 bolts (Part T).
4) Bolt top back cross piece (Part OB) to legs (Part L) using a total of 4
bolts (Part T).
5) Bolt top front cross piece (Part OF) to legs (Part K) using a total of 4
bolts (Part T).
6) Bolt 2 Top side cross pieces (Part P) to upper legs (Part K & L) using a
total of 8 bolts (Part T).
7) Bolt drawer mount cross piece (Part Q) to (Part OF) and (Part OB)
using 2 Bolts (Part T).
8) Bolt Drawer Assembly (Part R) to frame using 4 bolts (Part T).
9) Bolt wood top (Part S) to the frame using 4 wood screws (Part U)
provided.
(see page 11 for assembly diagram)
MAINTENANCE
Powder Coat Finish
For heavy build-up of dirt and grime, our powder coat paint finish can be
cleaned with spray wax. Lightly spray the wax on the surface, and gently
wipe with a soft, dry microfiber cloth. Window cleaner and a soft cloth
dampened with water can be used to clean the finish on a regular basis.

Customer Satisfaction

All mechanical parts are inspected and adjusted for proper use before
shipment; however, mechanisms such as locks may shift during transit.
Should any of these items not operate correctly, please call customer
assistance at 1-800-874-6625.
- 4 -