Danby DWM120WDB-3 Manuel Du Propriétaire page 7

INSTALLATION INSTRUCTIONS
TRANSPORT BOLTS
Remove all packaging materials from the appliance.
Please dispose of packing materials properly. Do
not allow children to play with packing materials.
Before using this appliance, the transport bolts must
be removed from the back.
1. Loosen the four transport bolts using a wrench
and remove them.
2. Cover the holes with the provided transport hole
plugs.
3. The transport bolts secure the inner tub of the
appliance during transportation. Keep the
transport bolts for future use.
TRANSPORT FOAM
Ensure that the transport foam is removed from the
under side of the appliance. This foam holds the
motor and tub steady during transportation and
must be removed before using the appliance.
If the foam does not come out all in one piece, put
the appliance on its side and ensure that all foam
is removed from the inside of the appliance before
using it for the fi rst time.
LEVEL THE APPLIANCE
There is are four adjustable feet on the four corners
of the appliance. If the appliance is not level, follow
these instructions.
1. Loosen the lock nut securing the adjustable feet.
2. Turn the feet until the appliance is level.
3. Tighten the lock nuts to ensure the feet stay
secure.
6