Recalling Preset Stations; Software Version - Sangean H202 Mode D'emploi

Recalling preset stations

. Press the Power button to turn on the radio.
. Select the required waveband by pressing the Band button.
3. Momentarily press the required Preset button, the preset number
and station frequency will appear in the display.

Software version

The software display cannot be altered and is just for your refer-
ence.
. Turn off the radio.
. Press and hold the Preset button 3 for  seconds until the software
version number (e.g. P0) shown on the display.
Setting Tuning step
3. Continue pressing the Preset button 3 and you will hear a beep.
The display will switch to tuning step setting. Press the Tuning
up/down button to choose the desired FM tuning step (50 kHz or
100 kHz) and press the Preset button 3/step button to confirm
the setting.
4. After the confirmation of FM tuning step, press the Tuning up/down
button to choose the desired AM tuning step (9kHz or 0 kHz)
and press the Preset button 3/step button to confirm the setting.
GB
8