Jump Starter - HQ CAR-START02 Mode D'emploi

Jump Starter

Overview:
1. Welding clamp (+)
2. Emergency light
3. Polyethylene casing
4. Switch
5. Battery meter
6. Light switch
7. Battery meter switch
8. 12V output socket
9. Compressor storage (backside)
10. Welding clamp (-)
11. Charging input socket
12. Charge indicator
Features:
• 900 Amps peak/400 amps boost starting power.
• Starts cars, trucks, recreational vehicles and boats without the need of a host vehicle.
• 12 V DC cigarette socket with overload protection (up to 50 hours of power output).
• Storing without risk of leaking battery.
• Battery condition meter.
• Moulded and durable high-impact casing.
• Emergency lighting.
• Integrated compressor (260 PSI).
User instructions:
Charging
Before first use the jump starter has to be charged. There are 2 ways to charge the internal battery. You
can charge it with the 12 V DC cigarette plug or with the AC power adapter.
Plug the required charging adapter into its power source and connect it to the power socket (11).
The charge indication LED will burn to indicate that charging is in progress.
Note: For maximum battery life, we recommend that your power booster is kept fully charged at all times.
If the battery goes into a discharged state, its life bay can be shortened. The next table shows the
relationship of the frequency of use between recharging and the expected number of charging cycles.
No. of jump-starts between recharge cycles
1
5
10
The next table shows the time of recharging after a number of jump-starts
No. of jump-starts
1
2
3
4
5
etc.
ENGLISH
Discharge and recharge cycles
Recharge time (in hours)
2
1000+
700+
500+
8
16
24
32
40