Use - DS Produkte 02932 Mode D'emploi

Wood Saw Blade
Drill Bit Attachment
File or Glass / Tile Cutter
1. Insert the bow (6) into the handle (8) (see the "Use" chapter – "Universal Saw Blade").
2. Place one saw blade holder (5) into the bow, the other into the recess provided for it
on the handle and fi x it a little using the locking screw (7). Do not screw it tight!
3. Hang the fi le (1) or the glass / tile cutter (3) into the two saw blade holders and fi x it
with the locking screw (see the "Use" chapter – "Universal Saw Blade").

Use

PLEASE NOTE!
■ Check a workpiece for any nails, screws, etc. and remove them before sawing.
■ If possible, do not hold a workpiece with your hands when working with it! It is safer
to securely clamp the workpiece in place.
■ Guide the saw only with moderate application of force.
Always wear safety goggles when sawing to protect your eyes from very small
parts fl ying around!
Wear a protective dust mask when carrying out work that produces a lot of dust!
17
Insert the wood saw blade (12) into the handle (8) and fi x it
with the wing nut (10) at the top of the handle.
Insert a drill bit attachment (11) into the handle (8). Make sure
that the drill bit attachment fi ts securely.
EN