LENCO PQB-1050 Mode D'emploi page 7

English
PC/Mac USB
1.Use the supplied USB charging cable to connect the spare battery as illustrated to a USB port on your computer or to a mains
adapter with a USB socket (not included in delivery).
It will start charging immediately.
While charging, the blue indicator lights show the current battery capacity on the charging display (25%-50%-75%-100%):
Indicator light lights up - capacity reached
Indicator light is flashing - being charged
Indicator light is off - charging capacity not yet reached
Once all four indicator lights are lit up, the spare battery is fully charged.
2.After use, disconnect the USB charging cable from the USB port on your computer or the mains adapter, and from the
micro USB socket on the spare battery.
Charging mobile devices with the spare battery
You should also refer to the instruction manual of your mobile device.
•Use the supplied USB charging cable or a USB (type C) charging cable (not included in delivery) to connect the spare
battery to the device that you would like to charge.
English
PC/Mac USB
07
EN
NL
DE
FR
ES