JRI Maxant Spy RF Notice D'utilisation page 19

Choose fixed IP Address mode (check "use the following IP settings"), enter an IP address (provided by the network administrator or proposed
by the PC; eg. 192.168.0.1) and enter a subnet mask (for example: 255.255.255.0); then select Next
Select in the list the scenario "REAL PORT" (redirection of port com), and Next
©JRI Maxant
Click on Next – the list of Digi Connect ME
devices that are available on the network is then
displayed,, each with its IP address (fixed or
issued by the DHCP server) and its MAC address.
The modules are visible 2 to 3 minutes after
installation.
Select the device you wish to install, and Next
19