HumanTechnik lisa A-2465-0 Mode D'emploi page 9

How it works
A signal unit consists of at least
one transmitter and one receiver.
The remote beeper / remote door
bell unit transfers signals wire-free
(radio signal 868.35 MHz) to the
receiver.
Special features
A recognised signal is transmitted
fur a duration of 15 seconds. This
increases reliability and range.
Included in the standard
package:
- lisa remote beeper / remote door
bell unit
- 1.5V battery (type: Lady)
- Operating instructions
If any parts are missing please
immediately contact your dealer or
the manufacturer directly.
Initial operation
1. Inserting the battery
1. Release the screws on the trans-
mitter housing.
2. Remove the top of the housing.
3. Insert a new battery (ensure
polarity is correct!)
Battery type:
Lady
9 english