Cleaning, Care & Maintenance - Polar CR899 Mode D'emploi

Turn On
1. Ensure the power switch is set to [O] and turn
on at the socket.
2. Switch on the Power [I].
Illumination
Press the light button
lamp underneath the glass cover.
Adjusting the Temperature
1. Press SET button. The set temperature is
displayed.
2. Press up button or down button
change the set temperature.
3. Press SET button to exit.
4. When the set temperature is reached, the
refrigerant indicator light goes out.
5. The appliance is now ready for food to be put
inside and keep cold.
Manual Defrost
1. To start manual defrost, press and hold defrost
button for 6 seconds.
2. To stop manual or automatic defrost, press and
hold defrost button
Troubleshooting
Fault
The appliance is not
working
The appliance is not
cooling
Error code EE4
CR899_UK+FR_A5_v3_20210524.indb 5 CR899_UK+FR_A5_v3_20210524.indb 5
to switch ON/OFF the
to
for 6 seconds.
Probable Cause
The unit is not switched on
Plug or lead is damaged
Fuse in the plug has blown
Power supply
Coolant Leak
Fan Motor Failed
Airflow to the condenser
obstructed
Condenser is clogged
• Restricted Airflow
• Blocked Condenser
Cleaning, Care &
Maintenance
Switch off and disconnect
from the power supply before
cleaning
• Wipe down the exterior of the appliance with a
damp cloth.
• Remove the GN pans and clean with warm,
soapy water and a damp cloth.
• Clean the interior of the appliance as often as
possible.
• Do not use abrasive cleaning agents. These
can leave harmful residues
• Always wipe dry after cleaning
Cleaning the Condenser
Periodic cleaning of the Condenser can extend the
life of the appliance.
POLAR recommend that a POLAR agent or qualified
technician clean the condenser.
Replacing the Lamp
Call your POLAR dealer or a qualified electrician.
The Lamp Assembly is available to purchase as a
spare part.
Solution
Check the unit is plugged in correctly and
switched on
Call POLAR agent or qualified Technician
Replace the fuse
Check power supply
Call POLAR agent or qualified technician
Call POLAR agent or qualified technician
Increase the gap between appliance and
obstacles/heat source
Call POLAR agent or qualified technician
• Increase airflow
• Call POLAR agent or qualified
Technician
UK
5
2021/5/24 16:51 2021/5/24 16:51