GoodOne SN2268 Manuel D'utilisation page 10

1. Only connect the device to 220-230V and to an earthed wall socket.
2. Use the device carefully, do not press too hard on the textile and make
sure that your garment is not wrinkled, this can prevent damage to
your garments.
3. Only use the device for textiles.
4. If you are not using the device, turn off the device.
5. Keep the device away from the human body.
6. The device is only suitable for household use. Overuse in commercial
use can result in a shorter life.
7. Children or people with physical or mental disabilities should not use
the device. Use of the device is only permitted if a supervisor is
present who is responsible for the safety of the user.
8. Use and keep the device out of the reach of children.
9. Do not leave the device unattended while it is in operation.
10. Do not use the device without a lint container, blade unit or net cover.
11. Do not remove the lint container or net cover during use.
12. Switch off the device before removing the net cover.
13. Do not disassemble, repair, or repair the device yourself. To avoid
damage to the device and personal injury, take the device to an
authorized service center for repairs.
14. Do not use the device if it is not working properly or if it is visibly
damaged.
15. Make sure that the blade unit does not come into contact with sharp or
hard objects.
16. Switch off the device before cleaning or maintenance executes. Empty
the lint container when it is 70% full and thoroughly clean the area
around the blade unit with the supplied cleaning brush. Do not switch
on the device while cleaning or performing maintenance. Note: the
blades of the blade unit are sharp. Keep your fingers and hands away
from the blades.
17. Cleaning and maintenance must not be performed by children.
18. Do not use, store or hold the device near hot or humid areas such as
bathtubs, showers, washbasins, ovens, microwaves or other objects
that contain water or become hot.
19. Always keep the device dry. The device must not come into contact
with water and do not immerse the device in water.
20. Do not touch the device with wet hands.
21. Avoid direct sunlight and high temperature to avoid deformation or
malfunction of the product.