Technical Data - Electrolux KF 60 Série Mode D'emploi

Descaling - making your coffee
maker last longer
As a precautionary measure, we recom-
mend descaling every three months.
Only use an environmentally friendly
descaler and follow the instructions on
the packet. Please do not use a descaler
with a formic base, or any descaler in
powder form.
1 Fill the water tank with water and only
then add the descaler. Not vice versa!
0 Place thermal jug (Figure 1/C) with
closed lid (Figure 7/b) in the appliance.
0 Allow the descaler to act for about 15
minutes, then switch the appliance on.
Switch it off when the descaler solu-
tion has finished flowing through.
If necessary repeat the descaling
3
process.
0 Following this, allow the appliance to
run at least twice with fresh water.
0 Thoroughly rinse the water tank, ther-
mal jug, lid and filter holder under
running water, activate the filter valve
repeatedly during the rinsing process.
Thermal jug
You can purchase a new thermal jug
from your sales dealer or the service
centre specifying the model of your
coffee maker, see rating plate
(figure 1/J).

Technical data

Mains voltage:
Power consumption:
This appliance complies with the fol-
;
lowing EC directives:
• 73/23/EEC of 19/2/1973 "Low
voltage directive", including revision
directive 93/68/EEC.
• 89/336/EEC of 3/5/1989 "EMC
directive", including revision
directive 92/31/EEC.
g
220 – 240 V
1000 W
11