BST Pro UPA-30CD Manuel D'utilisation page 9

UPA-30CD
13. REPEAT BUTTON
Press one time to repeat one track
Press two times to repeat CD player ( USB key )
Presse three time to disable repeat function
14. VOL - BUTTON
To decrease the volume of the built-in CD-USB player
15. ON / OFF BUTTON
To switch the built-in CD-USB player on or off
16. EJECT BUTTON
To open or close the CD tray
17. VOL + BUTTON
To increase the volume of the built-in CD-USB player
18. SKIP + BUTTON
Press this button to select the next track ( or file ). Hold the button to activate fast search
19. SKIP - BUTTON
Press this button to select the previous track ( or file ). Hold the button to activate fast search
20. STOP BUTTON
To stop the playback of the CD ( or the USB key )
21. CD TRAY
Permet d'allumer ou d'éteindre l'appareil.
22. POWER SUPPLY SOCKET + FUSE
Used to connect the AC mains power to the unit.
The fuse is used to protect power amplifier. If the fuse is broken, replace it by a same value and same size fuse
23. POWER SUPPLY SELECTOR
The selector is used to choose the power supply value ( in france : 220V )
24. 24V DC SOCKET
Connect on this socket a 24V DC power supply. When the main power supply is disable, the 24V DC power supply is automatically
activate
25. SPEAKER OUTPUT
used the terminal COM and 100V for constant voltage speaker with transformer 100V.
used the terminal COM and 70V for constant voltage speaker with transformer 70V.
used the terminal COM and 4-8 ohms for low impedance speaker
26. REC OUTPUT
Connect on this output the record device as tape recorder, DVD recorder or an eternal power amplifier
27. AUX INPUT
Connect on this input a line level device as CD player, DVD player, mixer, smartphone, tablet,.... Cinch connector
28. MIC - LINE 3 INPUT
Connect on this input either a line level device as CD player, DVD player, mixer, smartphone, tablet,.... either a microphone. Combo XLR-
Jack
29. MIC - LINE 3 LEVEL SELECTOR
Select line if you connect a device as CD player, DVD player, mixer,...
Select mic if you connect a dynamic microphone
Select +15V if you connect a condenser microphone
30. MIC - LINE 2 INPUT
Connect on this input either a line level device as CD player, DVD player, mixer, smartphone, tablet,.... either a microphone. Combo XLR-
Jack
31. MIC - LINE 2 LEVEL SELECTOR
Select line if you connect a device as CD player, DVD player, mixer,...
Select mic if you connect a dynamic microphone
Select +15V if you connect a condenser microphone
© Copyright LOTRONIC 2014
BSTDJ.COM
Page 9