Installing The Battery Of The Remote Control; Getting Started - Tech Line PF-608H Mode D'emploi

INSTALLING THE BATTERY OF THE REMOTE CONTROL

Place the Remote Control with the buttons facing downwards.
Pull the tray of the battery compartment out directly.
Place a CR2025 lithium battery on the tray with the positive + symbol face up.
Close the tray by pushing it into the battery compartment.
Please note: Please ensure that the battery replaced is disposed in accordance with local environmental legislation.

GETTING STARTED

Assemble the DPF bracket to prop the unit up.
Plug the power adaptor into an electrical outlet.
Adjust the Power switch at the back of the DPF to "ON".
GB-5