Signal INCONCERT PRO Guide De L'utilisateur page 4

HOW TO SET-UP THE INCONCERT PRO
1. Remove all package contents from the box.
2. Plug one end of the included AC adapter into a powered wall outlet.
3. Plug the other end of the AC adapter into DC IN port located on the back of the InConcert Pro.
CONNECTING A DEVICE VIA BLUETOOTH
1. Turn the power on by pressing the Power Button.
2. Press the "MODE" button until the Bluetooth LED starts flashing blue.
3. Open the settings on your smartphone, tablet, computer, or Bluetooth music device (Bluetooth
must be enabled).
4. Select InConcert Pro from the devices list.
5. Once paired, you will hear a sound and the Bluetooth LED will start flashing slowly.
6. Volume can be adjusted from either your device or by using the Volume Dial on the InConcert Pro.
NOTE: Your device will automatically find and pair with the InConcert Pro after the initial pairing.
If your device does not automatically pair, repeat steps 3-5.
CONNECTING A DEVICE VIA THE AUDIO CABLE
1. Turn the power on by pressing the Power Button.
2. Press the "MODE" button until the AUX IN LED turns white.
3. Plug one end of the included audio cable into the AUX IN port located on the back of the
InConcert Pro.
4. Plug the other end of the audio cable into your device.
5. Volume can be adjusted from either your device or by using the Volume Dial on the InConcert Pro.
CONNECTING A HOME STEREO OR RECEIVER VIA THE RCA CABLE
1. Turn the power on by pressing the Power Button.
2. Press the "MODE" button until the RCA LED turns white.
3. Plug one end of the included RCA cable (red and white plugs) into the STEREO IN port located
in the back of the InConcert Pro.
NOTE: The white plug goes into the L port and the red plug goes into the R port.
4. Plug the other end of the RCA cable into your home stereo or receiver.
5. Volume can be adjusted from either your home stereo or receiver or by using the Volume Dial
on the InConcert Pro.
PLAYING MUSIC VIA AUX OUT MODE
The AUX OUT allows you to make speakers wireless that would otherwise not be. It essentially turns
the InConcert Pro into a Bluetooth receiver.
1. Insert the included audio cable into the AUX OUT port located on the back of the InConcert Pro.
The speaker will automatically change to AUX OUT mode.
2. Connect the other end of the audio cable to your home system, higher powered equipment or
second speaker to enjoy music wireless on your system.
NOTE: When a home stereo, higher powered equipment or second speaker is connected through
AUX OUT, you will still hear the music coming from the InConcert Pro.