Refilling Staples - IDEAL 8590 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44

Refilling staples

1. Switch off the device at the power switch.
Disconnect the mains plug. Open the
bottom cover. Pull the staple holder down
and hook it into the applicable recess.
2. Open the magazine.
3. Insert the new staples.
Only use a new set of staples that is at least
5 cm long to refill the magazine.The system
may jam if a set of staples shorter than 5 cm
is used or if you attempt to use several sets
of staples.
4. Bring the staple holder slowly back to its
initial position.
Close the bottom cover.
Connect the power cable and switch the
device back on at the power switch.
35

Publicité

Table des Matières
loading

Table des Matières