Ca-Mi NEW MAMILAT Mode D'emploi page 15

•
Connect the short silicon tube 1 to the filter 2 to one of the two outlets of the bottle 3
•
The other end of the tube must be connected to the suction outlet of the equipment 4
•
Connect the PVC air tube 6 to the other outlet of the bottle 5 (biberon 250cc)
•
The other end of the tube must be connected to the small-diameter outlet of the breast pump
nipple shield located on the bottle.
•
Connect the plug to the electrical mains supply.
•
Switch on the equipment 7 to start suction and close the nipple shield's large-diameter outlet
with your finger
•
The bottle without couple must be used as an overflow container. It must not be filled.
•
The device must be used on a plan of horizontal operation.
INSTRUCTIONS
15