Compliance Norms - Klimasan S 56 SC Mode D'emploi

Transporting your visi/cooler:
Before relocating the body, unplug it from the mains socket, defrost it, wipe the interior walls and
floor with a damp cloth, place the plastic blockings between the glass-door and the body and
carry it in the normal position as it is used.
Attention: Expansion gas (C-Pentane) is used in the insulation system of the visi/cooler. When
you dispose the body, it requires observing the applicable laws and rules of the country in which
it is used.
8. TROUBLE SHOOTING
•
If the visi-cooler does not function;
- Check if the visi/cooler is properly plugged in the mains socket
- Check if there is electric current to the mains socket
- Check if the fuse has blown out.
- Check if there is power failure.
•
If the visi-cooler operates more frequently than desired;
- Check if the door is opened very frequently or left open for a long time
- Check if the thermostat is set to chill more than desired
- Check if the compressor compartment is properly ventilated or compressor compartment
needs cleaning.
•
If the visi-cooler does not chill enough;
- Check the temperature setting
- Check if the door is opened very frequently or left open for a long time
- Check if the internal air circulation is interrupted by overloading
•
If there is odour in the visi-cooler;
- Check if odorous foodstuff is stored in uncovered containers
- Check if inside is properly cleaned
After checking the above-mentioned points and carrying out the recommendations, if your visi-
cooler still functions unsatisfactorily, contact the nearest authorized service centre, informing
your complaints as well as the model and serial number of your visi-cooler.

9. COMPLIANCE NORMS

Single Door Visi-coolers described in this manual are manufactured and inspected in
compliance with the
TS 7452, TS 2225 and TS 2000,
IEC 60335-2-89,
73 / 23 / EE,
89 / 336 / EEC norms.
CE : Kema Utrechtseweg 310
P. O. Box : 5185
6802 ED Arnhem, The Netherlands
Tel : +31 26 356 20 06
Fax : +31 26 352 58 00
10