Control Panel; Air Outlet - Danby DDR030BLWDB-ME Manuel Du Propriétaire

OPERATING INSTRUCTIONS
FEATURES

1. Control panel

2. Handles (both sides)
3. Water bucket
4. Water level indicator

5. Air outlet

6. Air fi lter
7. Continuous drain outlet
8. Power cord storage strap
9. Power cord storage band
10. Power cord
1
3
10
2
4
5
6
7
8
9
CONTROL PANEL
1. Auto defrost light: The light will illuminate
when frost builds up on the evaporator coils.
The compressor will cycle off and the fan will
continue to run until the frost melts.
2. Bucket full light: The light will illuminate when
the bucket is full or incorrectly positioned
inside the cabinet. The compressor and fan
operation will stop as a safety feature. When
the bucket is emptied or correctly re-positioned
the dehumidifi er will resume operation
automatically.
3. Display: Shows the actual (± 5% accuracy)
room humidity level in a range of 30% to
90%. Otherwise, displays selection when
programming humidity or timer.
4. Smart dehumidify: This function will
automatically adjust the humidity level with the
fl uctuating room temperatures. The humidity
level cannot be adjusted in this setting, it will
stabilize between 45% - 55%. Press the humidity
adjust buttons to cancel this feature.
5. Filter button: The check fi lter light will illuminate
after 250 hours of operation. After cleaning the
fi lter, press the fi lter button to turn off the light.
6. Continuous button: Press to activate the
continuous dehumidifying operation.
7. Fan button: Press to select normal or high fan
speed. The light will illuminate when set to high
fan speed.
8. Timer button: Press to set the timer.
9. Humidity adjust buttons: The humidity level can
be set within a range of 35% to 85% relative
humidity in 5% increments. For drier air, set to a
lower percentage value. For more damp air, set
a higher percentage value.
10. Power button: Press to turn the dehumidifi er on
or off.
1 2
4 5 6
3
3
9
7 8
10