Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FEATURES
A
B
D
C
F
E
G
H
I
K15 SERIES BREWER
A.
Water Level Guide
F.
K-Cup® Pod Assembly
B.
Handle
Housing
C.
K-Cup® Pod Holder
G.
Drip Tray Overfill Indicator
Assembly
H.
Drip Tray Plate
D.
K-Cup® Pod Holder
I.
Drip Tray
E.
Funnel
J.
Cold Water Reservoir Lid
J
K
L
M
N
O
P
K.
Cold Water Reservoir
L.
BREW Button
M.
LED Indicator
N.
Power Button
O.
Power Cord
P.
Drip Tray Base
6
BUTTONS & INDICATORS
POWER BUTTON (DOES NOT ILLUMINATE)
Press to turn the brewer power on and off.
ADD WATER INDICATOR
FLASHING BLUE — Fill the Cold Water Reservoir with cold water until it
reaches just under the rim of the desired level – 6, 8, or 10 oz. of the Water
Level Guide.
HANDLE INDICATOR
FLASHING BLUE — The blue light flashes when the minimum water amount
of 6 oz. has been poured into the Cold Water Reservoir. After adding your
desired amount of water (10 oz. maximum), lower the Cold Water Reservoir
Lid. The light will continue to flash until you lift the Handle.
BREW BUTTON
FLASHING BLUE — Indicates you are ready to brew. Press the BREW Button.
FLASHING RED — Indicates water is heating (approximately 2 minutes).
SOLID RED — Indicates brewing and dispensing of beverage has begun.
YOUR NEXT BREW
When the brewing process is complete, the Add Water Indicator light will
appear. At this point you can begin making the next beverage, or you can
power off.
AUTOMATIC SHUT-OFF
As a safety feature, your brewer will automatically shut off at any stage
when it is idle for longer than 90 seconds. Press the Power Button to restart.
If the brewer shuts off while the BREW Button was flashing blue, lift and
lower the Handle to reset.
DRIP TRAY OVERFILL INDICATOR
A red float will appear when the Drip Tray is almost full. Carefully slide Drip
Tray out and empty contents into the sink.
7
Publicité
Table des Matières
