ENHANCE ENPU1LR500BKEW Guide De L'utilisateur page 13

Press down together
Sleep mode: To conserve power the mouse enters sleep mode after 20 minutes of inactivity. Click on any button to wake mouse
Press: Scroll button + Right click
Two white LED flashes
Three white LED flashes
Four white LED flashes
LED Status Indicator
Red blinking (fast)
Red blinking (slow)
One white LED flash
Green
The ENHANCE PowerUP mouse software is required to
customize your mouse settings including LED color options
and button programming. To download the software please
visit ENHANCEgaming.com/support and select your
product from Drivers & Downloads.
The DPI is set to 2,400 DPI with presets at 600, 1,200,
2,400, 3,800, 4,600 and 6,000 DPI. Push up the DPI button
to increase the DPI setting or push down to decrease the
DPI setting. Use the software to change or add up to six
DPI settings.
Press down the scroll wheel and right-click button for three
seconds to change the rate of communication between
the mouse and PC. The rate setting affects the power
consumption and LED status. See chart below.
Report rate
125Hz
250Hz
500Hz
1000Hz
<10% battery remains
Charging complete (>90%)
13
Mode LED Status
Power-Saving Off
Office Off
Gaming On
e-Sports On
Status
Charging