Technical Specifications - Lindemann Limetree network Mode D'emploi

TECHNICAL SPECIFICATIONS

Measurement conditions: 22 °C, 230 V mains voltage,
Audio Precision AP2722.
Power consumption: 0.1 W standby, 3.5 W operation, max. 8 W
Power supply: 5V DC
Dimensions (W x H x D): 107 x 40 x 107 mm (4.2 x 1.6 x 4.2 in)
Weight: 300 g (10.58 oz)
Network player
Ethernet: 100 Mbit/s
WLAN: dual-band 802.11a/b/g/n/ac
Bluetooth: 4.2, A2DP
USB: 2.0 high-speed host interface, max. output current 1.5 A
Supported codecs: WAV, FLAC, AIFF, ALAC, MP3, AAC, Ogg Vorbis,
WMA, DSD
Support: UPnP and DLNA
PCM resolution: 44.1 kHz up to 384 kHz, 24 bit (WLAN up to 192 kHz)
DSD resolution: DSD 64 up to DSD 256 (WLAN up to DSD 128)
Gapless playback
Streaming services: TIDAL, Qobuz, Deezer, HighResAudio, Spotify
Internet radio and podcast
Roon ready
D/A converter
Resolution: 384 kHz/32bit and DSD 256
Dynamic range: > 120 dB
THD & noise: < 0.001% (@ 0 dB FS)
Clock: ultra-low jitter MEMS FemtoClock
Re-sampling: bit-perfect or DSD
Converter architecture: two AK4452 DACs in dual differential
mono mode, AK4137 re-sampler
Output voltage: 2.0 V @ 0 dB FS
Output impedance line output: 100 ohms
Headphone connector: 3.5 mm jack socket
Recommended headphone impedance: 32 -200 ohms
EN 25

Top