Thank you for purchasing this appliance. To ensure perfect operation and security, please read the manual
carefully and retain it for future reference. This manual can be downloaded from our site.
PROFESSIONNAL RIBBON STEREO MICROPHONE
Specifications:
•
Bidirectional polar pattern.
•
90° stereo mic in vertical arrangement.
•
The warm and natural sounds of the 50s and 60s.
•
The speed of response.
•
Trebles never aggressive.
•
Robust and high-quality materials.
•
Supplied with a special cable with two outputs.
•
Stable and reliable.
Technical specifications:
•
Type: Ruban stéréo.
•
Ribbon: 2.2 microns thick.
•
Cell: Two ribbons with Neodymium magnet and pure iron alloy.
•
Polarity: Bidirectional.
•
Stereo: 90° opening.
•
Frequency response: 30Hz -18kHz.
•
Sensibility : 50dB±3dB (0dB=1V/pa at 1kHz).
•
Output impedance: 20Ω.
•
Load impedance: 1000Ω.
•
Max SPL pressure: 140dB (at 1kHz≤1% T.H.D).
•
Self noise: 17dB A.
Safety precautions:
•
Never use phantom power (48V) with this ribbon mic. The power can quickly and irreversibly
damage to the ribbons.
•
Due to the thinness of these ribbons, the RSL resist very well to high sound levels. However, it is
very sensitive to air currents, close breathing, and rapid movement, which can damage the
ribbons.
•
If the head of the microphone is covered by hand or brought close to the speaker, howling sound
may be generated. To prevent this, first decrease the volume, then place the microphone so that
it is not pointed to the speaker and that there is a sufficient distance between the microphone
and speaker.
•
It is important to keep foreign particles out of the grill and the windscreen because they may
alter the frequency response of the microphone. The grill shall be periodically cleaned using
warm soap water, rinsed with plain water and let dry before replacing.
Illustrations et photos non contractuelles
Actual product(s) may differ from illustrations/photographs used
Copyright © 2020 IPE Music/Prodipe
Page 4