Caterlite CD274 Mode D'emploi page 3

Operation
Connecting the Element/Control Panel
The Element and Control Panel are supplied as a single detachable part to aid in cleaning the appliance.
To connect to the body of the appliance:
Locate the tabs on the front of the control panel with the slots on the rear of the body.
1.
Ensure the safety switch is aligned with the centre slot.
2.
Lower the unit onto the appliance, ensuring the tabs are located inside the slots.
3.
Connecting the Basket Handle
Care must be taken to ensure that the handle is correctly
assembled before being used.
Squeeze the two ends of the handle together.
1.
Slot the ends of the handle into the holes on the
2.
mounting plate of the basket.
Pull the handle back so that the handle is located
3.
behind the clips on the mounting plate.
ON/OFF (Green)/Heat (Red) indicator lights
Thermostat
Element
Safety switch
Tab
Slot
Body
Clips
Holes
Mounting
plate
UK
2