Before Using Your Fridge; Information About New-Generation Cooling Technology; Chapter -2: Your Fridge Freezer - Home Appliances SJ-BA05IMXRE-EU Guide D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 33
CHAPTER -1: GENERAL WARNINGS

Before Using your Fridge

• Before setting up your fridge freezer, check for any visible damage. Do not install or use your fridge freezer
if it is damaged
• When using your fridge freezer for the first time, keep it in an upright position for at least 3 hours before
plugging into the mains. This will allow efficient operation and prevents damage to the compressor.
• You may notice a light odour when using your fridge freezer for the first time. This is perfectly normal and
will fade away as the fridge starts to cool.

Information about new-generation cooling technology

Fridge freezers with new-generation cooling technology have a different working system than static
fridge freezers. In normal fridge freezers, humid air entering the freezer and the water vapour
emanating from the foods, turns into frost in the freezer compartment. In order to melt this frost, in
other words defrost, the fridge has to be unplugged. In order to keep foods cold during the defrosting
period, the user must store the food elsewhere and the user must clear the remaining ice and
accumulated frost.
The situation is completely different in freezer compartments equipped with new-generation cooling
technology. With the aid of fan, cold and dry air is blown throughout the freezer compartment. As a
result of the cold air that is blown easily throughout the compartment – even in the spaces between
shelves – foods are frozen equally and properly. And there will be no frost.
The configuration in the refrigerator compartment will be nearly same as the freezer compartment. Air
emitted by the fan located at the top of refrigerator compartment is cooled while passing through the
gap behind the air duct. At the same time, air is blown out through the holes on the air duct so that
cooling process is successfully completed in the refrigerator compartment. Holes on the air duct are
designed for even air distribution throughout the compartment.
Since no air passes between the freezer and refrigerator compartment, odours will not mix.
As a result, your fridge with new-generation cooling technology is easy to use and it offers you an
access to a huge volume and aesthetic appearance.

CHAPTER -2: YOUR FRIDGE FREEZER

This appliance is not intended to be used as a built-in appliance.
This figure has been drawn for informational purposes to show the various parts and accessories in the appliance.
Parts may vary according to the appliance model.
Fridge compartment
Wine rack *
Door upper shelf
Fridge shelves
Adjustable door shelf
Interior display / In room control
Chiller compartment *
Crisper cover
Bottle shelf
Crisper
Freezer - top basket
Freezer - middle basket
Freezer compartment
Freezer - bottom basket
Levelling feet
EN -6-
Egg holder
Ice tray
* In some models

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sj-ba05imxje-euSj-ba05imxwe-eu

Table des Matières