pick up "skip".
·Do not expose discs to direct sunlight or high humidity and temperature for extend periods. Long
exposure to high temperatures will warp the disc.
·Printable CD-R and CD-RW disc are not recommended, as the label side might be stickily and damage
the unit.
·Use a soft oil-based felt-tipped pen to write the information on the label side. Never use a ball-point or
hard-tipped pen, as this may cause damage to the recorded side.
·Do not use CDs with an irregular shape(octagonal, heart shaped, business card size, etc). CDs of this
sort can damage the unit.
·If you have any doubts of using CD-R/CD-RW disc, read the precautions supplied with the disc,or
contact the disc manufacture directly.
Connections
Caution:
·Switch off the power to all equipment before making connections.
·Read the instructions of each component you intend to use with this unit.
· Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal
interconnection cables together with the AC power cord.
FM antenna
While in FM mode, tune in an FM station and extend the lead to find the best position for the
reception. This antenna may need to be repositioned if you move your unit to a new location.
AC Power Cord
Plug this power cord into an AC wall socket.
NOTE:
Turn on the unit: Press the POWER button
to the I position.
Turn off the unit: Press the POWER button to the O position.
GB 6
(at the right side of the unit)