Interlogix TruVision DVR 41 Guide Rapide De Démarrage page 3

EN
TruVision DVR 41 Quick Start
Guide
Figure 1: Back panel connections
1. Connect up to 16 analog cameras.
2. Connect up to 16 audio inputs to RCA
connectors.
3. Connect up to two CCTV monitors: Spot and
main monitors
4. Connect to speakers for audio output.
5. Connect RCA connector to a microphone.
6. Connect to a RS-232 device.
7. Connect to a VGA monitor.
8. Connect to an optional eSATA device such as
SATA HDD, CD/DVD-RM.
9. Connect to a HDTV. The HDMI connection
supports both digital audio and video.
TVR 41 Quick Start Guide
10. Connect to an optional USB device such as a
mouse, CD/DVD burner or HDD. The DVR
supports both a USB DVD and a USB HD on the
front and rear USB ports.
11. Connect to a network.
12. Terminate the line to the dome cameras using
this RS-485 switch. Default is Off.
13. Connect to a PTZ control.
14. Connect to a keyboard (KTD-405 shown)
15. Connect up to 16 alarm input cables to relay
outputs.
16. Connect up to four alarm relay outputs.
17. Connect to ground.
18. Connect to a power supply.
19. Loop through for up to 16 analog cameras.
1 : EN