Publicité
Les langues disponibles
Les langues disponibles
12. LOW CUT FREQUENCIES CONTROLS
This control adjust the Low cut frequency which allows you to
cut all low useless frequencies.
13. INPUT 1 XLR & JACK CONNECTORS
This sockets are balanced. Connect one of this socket to one
output of your mixer.
14. OUTPUT 1 XLR & JACK CONNECTORS
This sockets are balanced. Connect one of this socket to one
input of your power amplifier.
19. OUTPUT 2 XLR & JACK CONNECTORS
This sockets are balanced. Connect one of this socket to the
other input of your power amplifier.
15. INPUT 2 XLR & JACK CONNECTORS
This sockets are balanced. Connect one of this socket to the
other output of your mixer.
16. POWER SUPPLY SELECTOR
Used this selector to choose the good Power supply. ( several
countries have another power supply )
17. POWER SOCKET + FUSE
Plug the AC power cord into any standard AC outlet. Before
plugging this cord in, be sure the voltage of AC outlet is
correct.
To protect your power amplifier from different kinds of ac
problems. If the power amplifier is "on" and nothing lights,
please verify fuse compartment. If fuse is broken, please read
it and change with a new one of same size and values.
WARRANTY CONDITIONS
BST equipment is covered by a 1-year warranty on parts and
labour except for Crossfaders (90 days).
The following rules apply from the day the equipment leaves the
factory:
The date on the invoice is considered to be the date the warranty
begins.
Only companies approved by BST are allowed to work on the
equipment. Warranty becomes void when other service
technicians open the equipment.
During warranty period, defective equipment must be sent by pre-
paid mail in the original box.
BST will return the goods by pre-paid mail during the first year of
warranty; thereafter the mailing cost is to be paid by the recipient
Potentiometers have a limited lifetime and are not covered by the
manufacturer for more than normal use.
For all service enquiries, refer to your local distributor, as he is
best able to help you.
Specifications :
S/N Ratio : > 95dB
Frequency response: 20Hz-20KHz (+/-0.3dB)
THD : < 0.01%
Filter of input : variable filter
Frequency range adjustment : +/-15dB
Dynamic range : 118dB
Input gain : -oo / -6db
Input impedance : balanced : 20 KOhms
unbalanced : 10 KOhms
Output impedance : balanced : 200 Ohms
unbalanced : 100 Ohms
Power supply : AC 110V-240V, 50-60Hz
Dimensions : 483x133x174mm
Weight : 1.3Kg
3
Publicité
