Beaba PIXIE TORCH Notice D'utilisation page 6

PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR
FUTURE REFERENCE.
1 USB cable
2 Micro USB connector
3 Body –luminous zone
4 Torch
5 Charging light
CAUTION
A long USB cable
under adult supervision.
CAUTION this cable is not a toy and is not suitable for children under 18 months.
Strangulation risk.
Keep out of the reach of a child under 12 months of age.
A OPERATING INSTRUCTIONS
Thanks to its hook
handle
1. In night light mode: press the "ON-OFF" button
on or off.
2. In torch mode: press the "ON-OFF" button
3. In combined mode:
- If the night light is switched on, move from night light mode to torch mode by
pressing the on/off button
- To switch off the night light completely, first of all switch off the torch mode
and then the night light mode.
Autonomy in night light mode >90 hours
b CHARGING THE PIXIE NIGHT LIGHT
Never charge the night light within the reach of children. The luminaires shall be
charge by an Independent SELV LED driver which should be certified with standard
EN 61347-2-13 (Class II, fail-safe or short circuit proof, with suitable output ratings,
and maximum output voltage shall not exceed 5 VDC).
Connect the USB cable
the voltage of the 5VDC night light.
1. Connect the other end of the cable to the night light's USB connector
2. If the night light is uncharged, the charging light
After charging, the light turns green, you can then unplug the night light and
store it away out of the reach of children.
Normal charging time varies between 4 and 6 hours. The night light can be switched
on while charging but in order to limit charging time it is best to switch it off.
1
is used to charge the night light. This should be done only
8
it is easy to hang the night light to a child's bed or a door
6
1
to a mains adapter or any type of USB port adapted to
6 "ON-OFF" button night light mode
7 "ON/OFF" button torch mode
8 Hook
7
to switch the night light
6
to switch the torch on or off.
4
turns red while charging.
2
.