How To Connect - König Electronic CMP-USB3SAT10 Mode D'emploi

Adaptateur usb 3.0 vers s-ata
Table des Matières

Publicité

Introduction:
This USB 3.0 to SATA adapter allows you to connect S-ATA HDD devices via an USB port to your computer. It turns any
S-ATA HDD device into a convenient external device. Now you do not have to worry about the data on your old hard disk
because the USB 3.0 to S-ATA adapter helps to transfer data from a S-ATA HDD to other devices. In addition, it offers
USB 3.0 with a theoretical data transfer speed of 5.0 Gbps. This is ten times faster than the USB 2.0 speed of 480 Mbit/s.
It is a perfect portable device for everyone.
Features:
*
Supports USB 3.0 specifications.
*
The maximum transmission speed of USB 3.0 allows 10-30 GB of video data to be copied to a 3.5" hard disk drive in
1/4 to 1/3 of the time compared to the existing USB2.0 interface.
*
High-speed AES encryption/decryption engine can enable building USB 3.0 HDD unit with encryption function to
protect confidential data. Moreover high-speed encryption and decryption processing provides throughput without
impairing the speed performance of standard HDD.
*
SuperSpeed (5 Gbps) / high-speed (480 Mbps) / full-speed (12 Mbps).
*
Compatible with Universal Serial Bus 3.0 specifications, Revision 1.0.
*
Compatble with Universal Serial Bus specification, Revision 2.0.
*
Mass storage class bulk-only transport.
Compatibel with mass storage class bulk-only transport, revision 1.0.
*
Supports HID class (optional).
*
SATA Gen2i (3 Gbps) & Gen1i (1.5 Gbps).
Compliant to Serial ATA Specification Revision 2.6.
*
Supports ATA / ATAPI device.
*
Supports 2 TB HDDS.
®
*
Supports Windows
Connections:
1) USB cable
2) Power connection
3) S-ATA connection

How to Connect:

Connect power-adapter plug to connection 2 of the USB 3.0 to S-ATA
adapter.
Plug the S-ATA connection into the S-ATA connection of the HDD.
Connect the power adapter to a wall outlet.
Plug the USB A connector of the USB 3.0 to S-ATA adapter into a
free USB 3.0 port of your computer system.
Note:
When the USB A connector is plugged into a USB 2.0 or USB 1.1 port the transfer speed will be adjusted accordingly and
not reach the max. transfer speed of 5.0 Gbps.
98/ME/2000/XP/Vista / 7 /Mac
ENGLISH
®
OS 9.X/10.X and Linux.
2

Publicité

Table des Matières
loading

Table des Matières