MC Crypt XPA225 Notice D'emploi page 25

Installation/Setup
Due to the diversity of furniture paints and polishes used, it is possible that the device's feet will leave
visible residue on furniture due to chemical reaction. The devices therefore should not be placed on
valuable furniture surfaces without any suitable protection.
Amplifier
The amplifier can be set up on a level surface or installed in a 19" rack.
Use as table device
• Place the amplifier on a straight, horizontal surface.
• The setup surface must not be sensitive to heat.
Use in a rack
• We recommend using a rack that can be opened from both sides, because it permits for easier installation and
connection.
• The amplifier's front plate has four attachment holes. Attach the device in the rack with four sufficiently large
screws.
• Attachment at the front plate alone, however, is not sufficient for secure attachment. Additionally, even
attachment must be provided for by side and bottom rails. The respective rack producers offer different options
for this.
Speakers
• Set up the speakers at the desired site of setup.
• Align the sound exit as desired
25