Rules For Safe Operation - RIDGID R9937 Manuel D'utilisation

RULES FOR SAFE OPERATION

WARNING:
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below, may
result in electric shock, fire and/or serious personal
injury.
Safe operation of this accessory requires that you read and
understand this operator's manual, and for the tool with which
this product is intended to be used. Read and understand
all labels affixed to the tool.
READ ALL INSTRUCTIONS
 Know your accessory. Read the operator's manual
carefully. Learn the product's applications and limitations
as well as the specific potential hazards related to this
product.
 Keep the work area clean. Cluttered work areas and
work benches invite accidents.
 This is a tool support. Do not use for any other purpose
than supporting tools not exceeding a maximum weight
of 30 lbs (10 lbs per arm).
CALIFORNIA PROPOSITION 65
WARNING:
This product may contain chemicals, including lead, known to the State of California to cause cancer, birth defects
or other reproductive harm. Wash hands after handling.
 Before using a tool, be sure all adjustments are secure.
 Use the tripod in a dry, indoor place protected from
wet conditions.
 When transporting the tripod in a vehicle, securely tie
it down to prevent movement and possible damage.
 Maximum weight placed on tripod must be 30
pounds or less.
 Do not use the tripod as a seat or stand.
 Check to make sure tripod does not rock, slide or
move prior to use.
 Put the tripod on a firm level surface where there is
plenty of room to handle and properly support the tool.
 Do not mount tools that exceed the maximum weight
capacity of the tripod or cause the tripod to tip
excessively. Just because the tool can be attached to
your tripod, it does not assure safe operation.
 Save these instructions. Refer to them frequently and
use them to instruct other users. If you loan someone this
product, also loan these instructions.
2 - English