Publicité
Laisser le Belzona 1511 durcir pendant les durées indiquées ci-dessous
sujet aux conditions indiquées:
Température
Chargement
léger
10°C/ 50°F
72 heures
20°C/ 68°F
18 heures
30°C/ 86°F
5 heures
40°C/ 104°F
4 heures
Alternativement, laisser sécher à température ambiante avant le post-
durcissement pendant au moins 1 heure à 50°C (122°F) minimum. La
température ne devra pas augmenter plus que 30°C (55°F) par heure.
Please read and make sure you understand the relevant Safety Data Sheets.
The technical data contained herein is based on the results of long term tests carried out in our laboratories and to the best of our knowledge is
true and accurate on the date of publication. It is however subject to change without prior notice and the user should contact Belzona to verify the
technical data is correct before specifying or ordering. No guarantee of accuracy is given or implied. We assume no responsibility for rates of
coverage, performance or injury resulting from use. Liability, if any, is limited to the replacement of products. No other warranty or guarantee of
any kind is made by Belzona, express or implied, whether statutory, by operation of law or otherwise, including merchantability or fitness for a
particular purpose.
Nothing in the foregoing statement shall exclude or limit any liability of Belzona to the extent such liability cannot by law be excluded or limited.
Copyright © 2018 Belzona International Limited. Belzona® is a registered trademark.
Belzona 1511 - Mode d'emploi - (2)
Complète charge
Immersion
mécanique ou
dans des
thermique
produits
chimiques
Post-
Post-
durcissement
durcissement
requis
requis
required
30 heures
Post-
durcissement
requis
24 heures
60 heures
6 heures
8 heures
HEALTH & SAFETY INFORMATION
www.belzona.fr
Les produits Belzona sont
fabriqués selon la
certification du Système
de Management de
Qualité ISO 9001
Publication n° 01-12-18 F
Publicité
